demo_taperP

1. Symbol:

1. Demo kit Transmission Line:

a) Parameters:

Name	Description	Unit	Default
Type	Type of transmission line(M0, M1, M2 or M1+M2)	nil	M1+M2
w1	Width of the taper	um	30
w2	Width of the taper	um	20
Length	Length of the taper	um	100

b) Range:

Type0 (M0) ; M0 transmission line ; Width, w1 and w2=(5 to 50 um) ; Length, l = 5um to infinity

Type1 (M1) ; M1 transmission line ; Width, w1 and w2=(5 to 50 um) ; Length, l = 5um to infinity

Type2 (M2) ; M2 transmission line ; Width, w1 and w2=(5 to 50 um) ; Length, l = 5um to infinity

Type3 (M1+M2) ; M1+M2 transmission line ; Width, w1 and w2=(5 to 50 um) ; Length, l = 5um to infinity

2. Notes:

1. Transmission lines on the same layer should be connected to the taper chosen on a particular layer.

2. Available both in schematic and layout with synchronization.