demo_ind_dc

1. Symbol:

2. Demo kit Inductor for DC Biasing:

Parameters:

Name	Description	Unit	Default
No.of turns(nturns)	The number of turns is fixed at 8.5 turns	nil	8.5
Inductance(L)	Inductance value is calculated from empirical equations. This is not editable and fixed at 15.46 nH	nH	15.46
Rotation	Rotation parameter of under pass metal. Choose proper value, depending on the layout requirements. L value does not change with rotation.	nil	Left
File	Name of the attached s2p file	nil	nil
Temp	Temperature (non editable)	Degree Celsius	25

3. Equivalent Circuit:

4. Notes:

a) The EM simulation result is converted into a s2p file and attached along to use as a model.

b) Proper transmission lines should be used (M1 or M2) for connecting the inductor.

c) The inductor is synchronized with layout.

d) This inductor can only be used for DC biasing.

5. Cross-section View:

The cross section view given above is not to scale.