demo_curveP

1. Symbol:

1. Demo kit Curve:

a) Parameters:

Name	Description	Unit	Default
Type	Type of curve(M0, M1, M2 or M3)	nil	M1
w	Width of the curve	um	20
Angle	Angle of the curve	degree	90
Radius	Radius of the curve	um	100

b) Range:

Type0 (M0) ; M0 curve ; Width, w=(5 to 50 um) ; Angle= (0 to +/-360 deg) ; Miter (0 to 1.0)

Type1 (M1) ; M1 curve ; Width, w=(5 to 50 um) ; Angle= (0 to +/-360 deg); Miter (0 to 1.0)

Type2 (M2) ; M2 curve ; Width, w=(5 to 50 um) ; Angle= (0 to +/-360 deg); Miter (0 to 1.0)

Type3 (M1+M2) ; M1+M2 curve; Width, w=(5 to 50 um) ; Angle= (0 to +/-360 deg); Miter (0 to 1.0)

2. Notes:

a) Transmission lines on the same layer should be connected to the curve chosen on a particular layer.

b) Available both in schematic and layout with synchronization.