demo_clinP

1. Symbol:

1. Demo kit Coupled Lines:

a) Parameters:

Name	Description	Unit	Default
Type	Type of transmission line(M0, M1, M2 or M1+M2)	nil	M1
w	Width of the transmission line	um	20
l	Length of the transmission line	um	100
w1	Width of line that connects to pin 1	um	0
w2	Width of line that connects to pin 1	um	0
w3	Width of line that connects to pin 1	um	0
w4	Width of line that connects to pin 1	um	0
offset1	offset at pin 1, for Thick metal only;(Extend, None, Recess)	nil	None
offset2	offset at pin 2, for Thick metal only ;(Extend, None, Recess)	nil	None
offset3	offset at pin 3, for Thick metal only ;(Extend, None, Recess)	nil	None
offset4	offset at pin 3, for Thick metal only ;(Extend, None, Recess)	nil	None

b) Range:

Type0 (M0) ; M0 coupled line ; Width, w=(5 to 50 um) ; Length, l = 5um to infinity ; w1, w2, w3 and w4 = (0 to 150 um)

Type1 (M1) ; M1 coupled line ; Width, w=(5 to 50 um) ; Length, l = 5um to infinity ; w1, w2, w3 and w4 = (0 to 150 um)

Type2 (M2) ; M2 coupled line ; Width, w=(5 to 50 um) ; Length, l = 5um to infinity ; w1, w2, w3 and w4 = (0 to 150 um)

Type3 (M1+M2) ; M1+M2 coupled line ; Width, w=(5 to 50 um) ; Length, l = 5um to infinity ; w1, w2, w3 and w4 = (0 to 150 um)

2. Notes:

a) These coupled lines are based on schematic MCLIN models (with proper MSUB definitions).

b) For general inter connections, use either Type 1 or Type 2 coupled lines. Type 3 coupled lines carry higher current (as their thickness is more).

c) Type 0 coupled line is generally used to connect capacitors.

d) Available both in schematic and layout with synchronization.