demo_cfilP

1. Symbol:

1. Demo kit Coupled Line Filters:

a) Parameters:

Name	Description	Unit	Default
Type	Type of coupled line filter(M0, M1, M2 or M1+M2)	nil	M1
w	Width of the coupled line filter	um	20
l	Length of the coupled line filter	um	100
w1	Width of line that connects to pin 1	um	0
w2	Width of line that connects to pin 1	um	0
offset1	offset at pin 1, for Thick metal only ;(Extend, None, Recess)	nil	None
offset2	offset at pin 2, for Thick metal only ;(Extend, None, Recess)	nil	None

b) Range:

Type0 (M0) ; M0 coupled line filter ; Width, w=(5 to 50 um) ; Length, l = 5um to infinity ; w1 and w2 = (0 to 150 um)

Type1 (M1) ; M1 coupled line filter ; Width, w=(5 to 50 um) ; Length, l = 5um to infinity ; w1 and w2 = (0 to 150 um)

Type2 (M2) ; M2 coupled line filter ; Width, w=(5 to 50 um) ; Length, l = 5um to infinity ; w1 and w2 = (0 to 150 um)

Type3 (M1+M2) ; M1+M2 coupled line filter ; Width, w=(5 to 50 um) ; Length, l = 5um to infinity ; w1 and w2 = (0 to 150 um)

2. Notes:

a) These coupled line filters are based on schematic MCFIL models (with proper MSUB definitions).

b) For general inter connections, use either Type 1 or Type 2 coupled line filters. Type 3 coupled line filters carry higher current (as their thickness is more).

c) Type 0 coupled line filter is generally used to connect capacitors.

d) Available both in schematic and layout with synchronization.